|
System type |
Bench top random access clinical
chemistry analyzer |
|
STAT-analytics |
Several sample positions available |
|
Throughput |
200 tests/hour with a cycle time of
18 seconds for mono- and 2 component tests 360 tests/hour with ISE |
|
Ion measurement |
Direct Potentiometry (ISE: K, Na, Li, Cl) |
|
Bar code identification |
Automatic bar code scan for reagents and samples |
|
Measuring principle |
Colorimetry (Rate/End Point); Turbidimetric
Immunoassay; |
|
Calibration |
Linear, non-linear, multi point |
|
Combined reagent/sample tray |
30 positions for bar coded patient samples
including STAT positions, 9 positions for blanks, calibrators,
controls, samples without barcode and ISE solutions |
|
Sample volume |
2 – 70 μL |
|
Sample tubes/cups |
Most commonly used blood collection tubes and
sample cups |
|
Sample types |
Serum, plasma, urine, CSF, whole blood |
|
Sample dilution |
Dilution ratio: 2 to 150 times |
|
Reagent on-board capacity |
30 different methods in bar coded mono - or twin
- containers for adapter-free one-grip loading, refrigerated |
|
Reagent pipetting |
Reagent 1: 50 – 300 μL
Reagent 2: 10 – 200 μL |
|
Reaction temperature |
37 ± 0.2 °C |
|
Reaction unit |
Temperature controlled rotating tray with 45
reusable quartz glass cuvettes (37 ± 0.2 °C) |
|
Photometry |
8 wavelengths: 340, 405, 450, 505, 546, 578, 660
and 700 nm (mono- and bichromatic) |
|
Photometric linearity and resolution |
Linearity: 0 – 2.5 OD; resolution: 0.0001 OD |
|
Water consumption |
Up to 7.5 liters per hour |
|
System interface |
Analyzer - PC: USB connectivity bi-directional;
CPU: Pentium IV or higher |
|
Power source/power consumption |
AC 220 V ± 10 %, 50 ± 1 Hz or AC 110 V ± 10 %, 60
± 1 Hz ; 600 VA (excluding PC/printer/monitor) |
|
Dimensions |
81 cm (W) x 70 cm (D) x 60 cm (H) |
|
Weight |
Approximately 110 k |
Trusted
performance